NewTechWood has locking systems which feature two clips, one locks and secures the board down (Locking Clip) and the other allows for expansion and contraction (Controlled Expansion & Contraction - CEC Clip), so that you don’t experience warping or distortion of any kind after installation. The system works because it allows the user to control the direction in which the expansion and contraction will take place.
Starting the first board is a breeze with the MG-3 starting clip. With these starting clips the clip with be completely invisible to the eye while remaining extremely quick and easy to install.
The Starting Clip is designed for decking boards with a groove height of 8.0 to 8.5mm.
End caps are an easy way to keep a clean finish on ends of the circle hollow deck boards if a fascia board does not need to be fixed.
TO DECKING PROFILES
DESCRATCH REPAIR KIT
Best for nail holes, chips, dents and
Antique, Maple, Teak, Ipe, Walnut, Redwood, Smoke White, Light Gray, Charcoal, Oak, Sand, Spring Green, Merbau, Stone Gray, Sliver Gray, Mirage Gray
2*10cm Wax Sticks / pack;
COLORED HEAD SCREWS
Best for neat finishes on starting and ending boards as well as fascias and stair treads.
Teak, Ipe, Walnut, Light Gray
#8 x 2’’,100 screws / pack; #2 Square or star drive bit included
● For levelling uneven ground under joists
● Perfect replacement for conventional joist gapping filler like stone or wood
● Use on the ground for decking and also on the wall for cladding & window installation