deck finishers

Deck Finishers

UltraShield® has the following decking accessories available: colored head stainless steel screws,starter clips, hidden fastener systems, end caps for hollow profiles, fascia boards in various dimensions for different applications, to perfectly finish your decking.

Hidden Fasteners

decking clips

The decking clips plays a significant role in any installation of composite decking, and should be understood before starting any installation to avoid mistakes.

NewTechWood® has a locking systems which features two clips, one locks and secures the board down (Locking Clip) while the other allows for expansion and contraction (Control Expansion & Contraction - CEC Clip), so that you don’t experience warping or distortion of any kind after installation. The system works because it allows the user to control the direction in which the expansion and contraction will take place.

UltraShield decking has grooved boards with a Hidden Fastener System

Why our clips work better

decking clips

The system allows the installer to place the board with proper gapping and also prevents warping or distortion of any kind in all seasons.

The Locking Clip allows one side of the board to move while the other side of the board is locked down, so that both boards can conduct expand and contract without conflict. The solution is especially designed for decks that are installed in a Brick Style pattern.

Fascia Boards

  • US05
  • 11 x 0.6 in
    (285 x 15mm)


End Caps

  • Board: UH02 | End Cap: EC-UH02
  • 5.5 x 0.9 in
    (138 x 22.5mm)


More about End Caps

Moisture can penetrate to the core in the end-cut area and could cause swelling, cupping and cracking at the edge area. All NewTechWood® End Caps are made of TPO Plastic which is durable and has high impact resistance under harsh weather conditions and extreme low temperature of - 40°C.


  • Solid Board: Moisture seal should be applied at the end-cut
  • Hollow Board: End-Cap should be installed at the end-cut
end caps


hidden fastener


  • Solid Board:
    Apply the waterproof agent at the edges using brush
end fasteners
  • Hollow Board:
    Step 1/2: Apply the silicone sealant

Option 1 : At the deges of the board hollow clips system

Option 2 : On the end cap composite decking hidden fasteners

  • Hollow Board:
    Step 2/2: Install the end cap onto the hollow board
composite deck fasteners

Wax Pen

fastener clips

NewTechWood DeScratch Repair Kit for mending small scratches, splits, nail holes, chips, gouges & damaged edges in capped composite or natural timber.

  • Remove any high points using the applicator
  • Rub the wax over the damaged area until level
  • Remove any excess wax using the applicator

Each pack contains: 0.4 x 0.39in Darker tone Wax Stick, 0.039 x 0.39in Lighter tone Wax Stick, 1 x pcs Applicator (*Charcoal color has 2 same tone sticks)

Measurements: W 3.5 x H 6.3 x D 0.6in (W 8 x H 16 x D 2cm)

Quantity: 10 packs/box

Standard colours: Antique, Maple, Teak, Ipe, Walnut, Redwood, Smoke White, Light Gray, Charcoal, Oak, Sand, Spring Green, Merbau,Stone Gray, Sliver Gray, Mirage Gray